3D printers that build objects by fused deposition modeling (FDM), also known as fused filament fabrication (FFF), currently selling under $1000, are listed in the chart below.
Continue reading “FDM 3D Printers Under $1,000 By Build Volume”Author AR
Chair Design Series, Part 4
It has been a little over 2 years and the chair design I was close to printing has not been printed. I was having difficulty trying to figure out how to prevent the chair from collapsing in the middle. My goal was to have an entirely 3d printed chair that could be printed on a desktop 3d printer. Some details remain; however, I believe printing can begin this Summer.
Continue reading “Chair Design Series, Part 4”Solution to Resume after Pause Problem
After installing a Microswiss Direct Drive extruder, I had one issue – the print end would not return to its last position after pressing pause. Since I did not use the pause feature often, I was not in a hurry to find a solution. However, I started to really miss being able to make multicolor prints. I finally contacted Microswiss and asked for help. A couple of weeks after back and forth emails, a super-knowledgeable and conscientious person named Paul found a solution. It was a retraction issue in the slicer.
Continue reading “Solution to Resume after Pause Problem”Storage Bin From Scrap Wood & 3D Printed Parts
I wanted to make one of the closets in my apartment look tidy. Since I had wood left over from old or failed projects, which was contributing to its untidy appearance, I decided to use some pieces to make it look better. A bin for tall objects has been a desire for some time. I attempted to make one a couple of years ago, but it was a failure. I know more now about how to make furniture strong, so I designed 3d printed parts to get the job done.
A couple of the one-inch oak dowels were bent and the screws did not go in all the way. In addition, they were not aligned properly. I was not going to let that stop me from making the bin. I designed parts to hold everything together. Each side has a different width and they stack instead of forming a square corner. The parts were screwed to the dowels except for the bottom four. The unit is lightweight and very sturdy. I am pleased to finally have a bin I enjoy seeing every day.
UPDATE February 9, 2022
The 3d printable files for the parts are now on Thingiverse.
Update June 15, 2023
The 3d printable files for the parts are on Printables.